Panasonic unveiled firmware update 0D.62 for Camera Control Unit AK-UCU700. It includes additional formats for 4K Studio Camera AK-UCX100 extended support of ST2110 JPG XS, improved network connectivity, as well as several bug fixes and minor improvements.
   

Panasonic AK-UCU700 Firmware Update Version 0D.62 includes:

1. Supports AK-UCX100 Ver.1.33 Additional formats

[ FREQUENCY: 59.94Hz ]

2160/29.97p, 2160/23.98p

1080/29.97p, 1080/23.98p

[ FREQUENCY: 50Hz ]

2160/25p, 1080/25p

2. Supports JPEG XS PAYLOAD setting

Related menu SETUP MENU> NETWORK >SFP1

> SFP1 TX PAYLOAD TYPE

3. Supports ST2110-40 (ANC Data) output (TX only)

SMPTE 299M, SMPTE 352M

Related menu SETUP MENU> NETWORK> >

MAIN ANC DATA TX: IP ADDRESS, PORT

4. Supports 31-bit subnet mask

The IP address for LAN, SFP1, and SFP2 can now be set to 31 bits, "255.255.255.254".

5. Display a warning when the CAM connection times out

If the optical signal is received normally but a normal connection cannot be established due to incorrect settings, the message "Please Check Camera Connection" is displayed

6. Improved the stability of SRT distribution

7. Fixed a problem with ST2110 output when a specific multicast group address is set

8. Fixed the position of the SKINTONE DTL CURSOR when selecting the TrueP format

9. Fixed a problem with ROP connection, such as a disconnection

Please visit Panasonic’ site to download AK-UCU700 Version 0D.62 Firmware Update.